Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
user:zeman:mdmake [2010/11/05 15:28] zeman |
user:zeman:mdmake [2010/11/05 16:30] zeman Acknowledgements. |
* What are the constraints for the values in the respective dimensions. (Standard way is the ''.md.if'' directive but we would like to be able to constrain the ''.STATES'' dimension (or the last dimension in the list) directly in the rule. | * What are the constraints for the values in the respective dimensions. (Standard way is the ''.md.if'' directive but we would like to be able to constrain the ''.STATES'' dimension (or the last dimension in the list) directly in the rule. |
* MD-make will generate many normal rules from the multidimensional rule. In these generated rules, all combinations of all values in all affected dimensions will appear. As these rules are not templatic any more, we don't have to fear that gnu make will encounter cyclic dependencies or other problems. | * MD-make will generate many normal rules from the multidimensional rule. In these generated rules, all combinations of all values in all affected dimensions will appear. As these rules are not templatic any more, we don't have to fear that gnu make will encounter cyclic dependencies or other problems. |
| * New variables ''$(*1)'' (or other number instead of 1, for n-th dependency) are available within the commands in the rule. MD-make finds the rule that creates this dependency, uses it to determine the set of dimensions of the dependency, constructs the name of the file and replaces the variable by the file name. MD-make leaves intact ''$<'' and ''$^'' that will still work in the generated makefile. However, don't use ''$*'' that does not make sense in MD-rules (unlike in normal pattern rules). |
* Uvnitř příkazů lze použít nové proměnné ''$(*1)'', resp. místo jedničky jiné číslo, pro n-tou závislost. MD-make si najde pravidlo, kterým tato závislost vzniká, zjistí si z něj, v jakých rozměrech se pohybuje, a podle toho zkonstruuje jméno příslušného souboru, které na dané místo vloží. Beze změny ponechá ''$<'' a ''$^'', které budou fungovat samy od sebe, avšak pozor na ''$*'', které v MD pravidlech (na rozdíl od obyčejných šablonovitých pravidel) nemá smysl. | * A MD-rule ends obligatorily with an empty line (even at the end of the file). |
* MD pravidlo končí povinně prázdným řádkem (dokonce i na konci souboru). | * If there is no parameter ''.md.for'' the rule is generated for all known dimensions except the last one (''STATES'' in our case). |
* Není-li uveden parametr ''.md.for'', pravidlo se rozgeneruje pro všechny známé rozměry kromě posledního (u nás ''STATES'', ale může se jmenovat i jinak). | * The ''.md.fix'' parameter contains values that are fixed in this rule, i.e. the rule is not generated for other values of the same dimension. So far it is not allowed to include more values in one dimension (although in theory we may want to use it to constrain partial generation). |
* Parametr ''.md.fix'' obsahuje hodnoty, které jsou v tomto pravidle pevné, tj. pravidlo se nerozgenerovává pro ostatní hodnoty téhož rozměru. Není zatím dovoleno uvést více hodnot ve stejném rozměru (i když by to teoreticky mohlo sloužit k vymezení částečného rozgenerování). | * If ''.md.fix'' contains a dimension that at the same time appears in ''.md.for'', it means that the target type exists in this dimension, has its value in its name/path but this particular rule generates this file only for one value of that dimension. |
* Jestliže ''.md.fix'' obsahuje rozměr, který je současně uveden v ''.md.for'', znamená to, že cílový typ souboru se pohybuje v tomto rozměru, má jeho hodnotu uvedenou v cestě, akorát toto konkrétní pravidlo generuje tento soubor pouze pro jednu hodnotu v dotyčném rozměru. | * If ''.md.fix'' contains a dimension that does not appear in ''.md.for'', it means that the target file type does not know this dimension and does not have it in its name/path but one of the source files knows the dimension and needs to know what value ve have on mind. We can figure out from the rules generating the source files what dimensions they exist in. |
* Jestliže ''.md.fix'' obsahuje rozměr, který není současně uveden v ''.md.for'', znamená to, že cílový typ souboru tento rozměr nezná a nemá ho uveden v cestě, avšak některý ze zdrojových souborů tento rozměr má a potřebuje vědět, kterou hodnotu máme na mysli. Které ze zdrojových souborů hodnotu ''.md.fix'' využijí, poznáme z pravidel, která tyto soubory generují jako cílové a vymezují jejich rozměry. | * If a source file requires a dimension not contained in the target file, and the dimension is not fixed, the rule will be generated for all values of this dimension. This means that there will be several competing rules for the same target file. |
* Jestliže některý zdrojový soubor vyžaduje rozměr, který cílový soubor neobsahuje, a tento rozměr není zafixován, pravidlo se rozgeneruje i pro všechny hodnoty tohoto rozměru. Bude pak existovat několik konkurenčních pravidel, která vytvářejí tentýž cílový soubor. | * ''.md.del'' removes dimensions from ''.md.for'' (handy if ''.md.for'' is not explicitly stated and contains all dimensions by default) |
* ''.md.del'' odstraní rozměry z ''.md.for'' (nejvíce se hodí, když ''.md.for'' není uvedeno a defaultně tedy obsahuje všechny rozměry) | * ''.md.fxd'' combines ''.md.fix'' and ''.md.del''. Contains values, not dimensions (like ''.md.fix'' and unlike ''.md.del'') |
* ''.md.fxd'' je jako ''.md.fix'' a ''.md.del'' dohromady. Uvádějí se hodnoty, nikoli názvy rozměrů (tedy jako u ''.md.fix'' a na rozdíl od ''.md.del'') | * If a command in a rule refers a dimension (e.g. ''$(*LANGUAGES)'') the reference will be converted to the actual value of the dimension. If different source files have different values of the same dimension within one generated rule the reference will be replaced by the value that the target file takes in this dimension (i.e. by the variable value). Anyway the purpose of such references is to refer to the variable dimensions. Modified values of particular source files are fixed exceptions, we know them in advance and can write them to the command directly, if necessary. |
* Odkaz na hodnotu rozměru z příkazu (např. ''$(*LANGUAGES)'') se převede na aktuální hodnotu daného rozměru. Pokud mohou mít různé zdrojové soubory různé hodnoty téhož rozměru v rámci jednoho vygenerovaného pravidla, odkaz se převede na hodnotu, které v tomto rozměru nabývá cílový soubor, resp. která je proměnná. Odkazy tohoto druhu byly stejně zavedeny kvůli proměnným rozměrům. Odlišné hodnoty u konkrétních zdrojových souborů jsou fixní výjimky, tyto hodnoty známe předem a v případě potřeby je můžeme do příkazu zapsat přímo. | |
| |
<code>.MDRULE | <code>.MDRULE |
$(TOOLDIR)/runmst.pl -m $(*2) < $< > $@</code> | $(TOOLDIR)/runmst.pl -m $(*2) < $< > $@</code> |
| |
* Je možné definovat vstupní soubory. Ty typicky leží úplně v jiné cestě, nebo se alespoň jmenují tak, aby se nepletly se soubory pojmenovanými pomocí hodnot rozměrů, a nehrozilo tudíž jejich smazání makem. Můžeme popsat jejich vlastnosti v jednotlivých rozměrech prostě tak, že vytvoříme obyčejné pravidlo, kde dotyčný vstupní soubor bude jako závislost, zatímco cíl bude soubor pojmenovaný příslušnými hodnotami rozměrů. Před pravidlo připíšeme ''.md.in:''. MD-make pak doplní příkaz pro zkopírování závislosti do cíle (''cp $< $@'') a navíc zkontroluje, že cílový soubor má hodnoty všech rozměrů, které soubor v daném stavu (hodnota posledního rozměru) má mít. | * It is possible to define input files. These are typically in a completely different folder or they names are different so that they are not confused with the files named according to dimension values and they are not in danger of being removed by make. We can describe their properties in various dimensions if we create a normal rule where the input file is a dependency (source) and the goal is a file named by dimension values. We write ''.md.in:'' before such rule. MD-make adds a command to copy the source file to the target (''cp $< $@'') and checks that the target file has values for all dimensions that a file in its state (last dimension's value) ought to have. |
* Vygenerovaný makefile by navíc mohl obsahovat pro každou hodnotu každého rozměru seznam souborů, v nichž je tato hodnota zafixovaná. Např. všechny cílové soubory v jazyce "hi". Kromě proměnné obsahující jména těchto souborů (HIFILES) by vygenerovaný makefile obsahoval cíl, který všechny tyto soubory vyrobí (hi), a cíl, který je smaže (clean_hi). | * The generated makefile could further contain for each value of each dimension the list of files for which this value is fixed. For instance, all target files in the language "hi". Besides the variable containing names of such files (HIFILES) there would also be a goal that creates/updates all such files (hi) and a goal that removes them (clean_hi). |
* V průběhu generování vícerozměrných pravidel si pamatovat seznam všech vygenerovaných cílových souborů. Ke každému cílovému souboru vytvořit hash, jehož klíčem je hodnota libovolného rozměru a hodnota u daného klíče je nenulová, jestliže příslušná hodnota rozměru je v názvu souboru obsažena. Na konci makefilu lze použít pravidlo ''.MDALL'', které vytvoří ''.PHONY'' cíl závisející na všech souborech obsahujících určité hodnoty. Např. | * Collect names of all generated target files during generating of the multidimensional rules. Create a hash for every target file where the key is the value in a dimension and the value under that key is non-zero if the value of the dimension is contained in the name of the file. At the end of the makefile there can be a rule ''.MDALL'' that creates a ''.PHONY'' goal depending on all files containing given values. E.g. |
| |
<code>.MDALL: d hi conll</code> | <code>.MDALL: d hi conll</code> |
| |
se přepíše jako | would be rewritten as |
| |
<code>.PHONY: all_d_hi_conll | <code>.PHONY: all_d_hi_conll |
all_d_hi_conll: <seznam všech souborů obsahujících hodnoty "d", "hi" a "conll"></code> | all_d_hi_conll: <list of all files containing values "d", "hi" and "conll"></code> |
| |
| ===== Download ===== |
| |
| Copyright © 2009 Daniel Zeman |
| |
| All software supplied with this package is released under the GNU |
| General Public License. This program is free software; you can |
| redistribute it and/or modify it under the terms of the GNU General |
| Public License as published by the Free Software Foundation; either |
| version 2, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License (below or at http://www.gnu.org/licenses/ |
| gpl.html) for more details. |
| |
| {{:user:zeman:mdmake.zip|mdmake.zip}} contains the script ''mdmake.pl'' (you need a Perl interpreter to use it), a sample multidimensional makefile and the normal makefile generated from it. |
| |
| ===== Acknowledgements ===== |
| |
| This research has been supported by the grant of the Czech Ministry of Education no. MSM0021620838. |